Our Collection · Dev Crow Egg Studio
Egg Self-Watering Planter
AED 120
PETGMade to orderLoading the 3D model…
Drag to turn · Ctrl + scroll or the buttons to zoomSwipe sideways to turn · pinch to zoom
Full. The little egg on the float stands above the rim.
Reservoir, inside the egg Holds about 570 mL below the soil, roughly one to two weeks for a small plant (to test).
Wick well A slotted column of soil stands in the water and draws it up to the roots. No cord to replace.
Fill port and float Pour water in here. The egg-topped float rides on the water and shows how full it is.
Air gap and drainage The max water level stays 3 mm under the funnel floor, and slots let extra water drain down, so roots never sit in water.
An egg you can grow things in. The shell is the water tank: fill it through the port, and a wick well keeps the soil evenly moist for days. A float with a little egg on top tells you when it needs a top-up.
True to size: 13.6 × 13.6 × 14.8 cm (proposed size)
Made to order, sliced for real
Sliced All three parts were run through OrcaSlicer 2.4.2 on one plate with a Bambu Lab P1S profile (0.4 mm nozzle, 0.2 mm layers, 15% infill, Generic PETG). At our example rates the minimum price is AED 82, so the AED 120 listing clears it by AED 38.
Specs
- Size
- 13.6 cm wide, 14.8 cm tall (a proposal). With a full reservoir the float's egg stands about 2 cm higher.
- Material
- PETG: water-resistant and holds its shape to about 75–80°C. Not food-safe.
- Holds
- About 570 mL of water and 310 mL of potting mix
- Parts
- Egg shell (the reservoir), inner pot with wick well and fill port, float indicator
- Plants
- Small plants that like even moisture: spider plants, pothos, herbs, African violets. Shown with a spider plant, which isn’t included.
How it's printed
- Every part prints upright with no supports. The foot under the egg is a 45° cone and the shell's rim is a 45° seat, so nothing overhangs more than 45°.
- The inner pot hangs on that conical seat, which centres it, with a 0.6 mm gap around its wall. The float has 1.25 mm of play in its tube so it never sticks when wet.
- The shell's 2 mm wall prints as four solid perimeters to keep the water in.
Fits, buoyancy and watertightness are designed in but still to test on a real print.