Our Collection · Dev Crow Egg Studio
Hex Modular Desk Organizer
AED 140
Starter setPLALoading the 3D model…
Drag to turn · Ctrl + scroll or the buttons to zoomSwipe sideways to turn · pinch to zoom
Layout: Staggered · 5 keys
Same channel on every side. Set two pieces side by side and their channels make a bowtie slot. Drop a key in and push until it clicks: its split legs flex past a small ridge at the bottom. Any piece joins any other, on any side.
Four hexagon pieces for pens, notes, clips and everything else on your desk. Line them up, stagger them or cluster them: every side takes a key, so the set fits the space you have and grows with extra pieces.
True to size: 16.1 × 12.9 × 10 cm as shown (proposed size)
Made to order, sliced for real
Sliced The whole set (four pieces and six keys) was run through OrcaSlicer 2.4.2 on one plate with a Bambu Lab P1S profile (0.4 mm nozzle, 0.2 mm layers, 15% infill, Generic PLA). At our example rates the minimum price is AED 61, so the AED 140 listing clears it by AED 79.
In the starter set
- Tall cup, for pens and scissors10 cm
- Mid cup, for markers and rulers7 cm
- Low cup, for notes and erasers4.5 cm
- Tray, for clips and earbuds2.4 cm
- Bowtie keys (one spare)× 6
- Each piece
- 6.4 cm across the flats, with 3.4 mm walls that keep the inside a clean hexagon (proposed sizes)
- Material
- PLA: crisp detail for an indoor desk. Keep it out of hot cars and direct sun.
How it's printed
- Pieces print upright and keys print standing on end, all with no supports. Every edge is vertical or a 45° chamfer.
- Pieces sit 0.6 mm apart (0.3 mm a side), and each key has 0.25 mm of clearance all round in its channels.
- The click is a 0.4 mm ridge low in each channel. It reaches 0.15 mm past the key's clearance, so the key's split legs flex past it and it settles into a notch.
The click strength and clearances are designed in but still to test on a real print.